Frame Strength Analysis on Bamboo Slicing Machine using Solidworks Software
DOI:
https://doi.org/10.11594/nstp.2025.4725Keywords:
Frame strength, bamboo slicing machine, finite element analysis, SDGs 9, SDGs 12Abstract
This study aims to analyze the frame strength of a bamboo slicing machine using Solidworks software. The machine is designed to facilitate the bamboo slicing process for small-scale industries, promoting sustainable and efficient bamboo utilization. By using finite element analysis (FEA) in Solidworks, this research evaluates maximum stress, deformation, and the safety factor under various operational loads. The simulation results show that the machine frame can withstand the applied loads with minimal deformation and a safety factor that meets the required standards. This analysis not only contributes to the improvement of bamboo slicing machine design but also supports the United Nations Sustainable Development Goals (SDGs), particularly Goal 9 (Industry, Innovation, and Infrastructure) by enhancing local industrial capabilities and Goal 12 (Responsible Consumption and Production) by encouraging sustainable material processing. These insights provide a foundation for future innovations in bamboo-based product manufacturing, aligning with efforts to promote sustainable production practices.
Downloads
References
Antana, A. E. (2009). Rekayasa Mesin Irat Bambu. In Dinamika Jurnal Kerajinan dan Batik (pp. 33–46).
Baguna, F. L., & Marasabessy, M. H. (2020). Utilization of Bamboo as Non-Timber Forest Products (NFTPs) by Kalaodi Villagers in the Indonesian Island of Tidore. Cannarium (Jurnal Ilmu-Ilmu Pertanian), 18(1), 21–29.
Bahru, T., & Ding, Y. (2021). A review on bamboo resource in the African Region: A call for special focus and action. International Journal of Forestry Research, 2021, 10–12. https://doi.org/10.1155/2021/8835673
Khajouei-Nezhad, M., Semple, K., Nasir, V., Hu, Y., Marggraf, G., Hauptman, J., & Dai, C. (2023). Advances in engineered bamboo processing: Material conversion and structure. Advances in Bamboo Science, 5(September). https://doi.org/10.1016/j.bamboo.2023.100045
Lestari, W. D. (2023). Desain mesin menggunakan solidwork tingkat dasar. Madani Berkah Abadi.
Undirwade, S. K. (2022). Influence of operational variables in bicycle driven bamboo slicing phenomena by methodology of response surface approach. Transdisciplinary Journal of Engineering and Science, 13, 23–41. https://doi.org/10.22545/2022/00174
Downloads
Published
Conference Proceedings Volume
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this proceedings agree to the following terms:
Authors retain copyright and grant the Nusantara Science and Technology Proceedings right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this proceeding.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the proceedings published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this proceeding.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See the Effect of Open Access).
How to Cite
Share
