The Influence of the Mass Fraction of Catalyst for Oxy-Hydrogen (HHO) Production on the Dry Cell Type of HHO Generator
DOI:
https://doi.org/10.11594/nstp.2022.2751Keywords:
Mass fraction of catalyst, Oxy-Hydrogen (HHO), water electrolysis, HHO Generator dry cell typeAbstract
One alternative energy that can e developed in the future is water. The water can produce future fuels, namely hydrogen and oxy-hydrogen, through the electrolysis of water. Electrolysis of water is one way to produce hydrogen into electrical and thermal energy conversion of hydrogen and oxygen. This study used a dry cell type HHO generator to produce Oxy-hydrogen. Oxy-hydrogen consists of two hydrogens and one oxygen or Oxy-hydrogen (HHO). Carried out to determine the optimal performance of the mass fraction of the catalyst on the productivity of Oxy-hydrogen by mixing 2500 ml of air and NaHCO3 as a catalyst. The observed mass catalyst fractions were 0.69, 1.38, 1.77, 2.15, 5 7.5, 10, and 15%. The results showed that the best Oxy-hydrogen production performance using a catalyst was 10% catalyst mass fraction with a production rate of 0.02250 l/s with an efficiency of 36.98%.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Tria Puspa Sari, Denny Widhiyanuriyawan, Amajida Sadrina, Ramadan Bimo Anggoro, Rahadi Agung Raharjo, Ryan Rizaldi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this proceedings agree to the following terms:
Authors retain copyright and grant the Nusantara Science and Technology Proceedings right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this proceeding.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the proceedings published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this proceeding.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See the Effect of Open Access).
